WT-High-Flow-Housings are built with regard to the flow rate much more compact and space-saving as common filter housings with standard filter elements. For this, diameter, length and adapter-connection-plate of the WT-High-Flow-Housings are tailored to accept WFHFF- and WFHFC-High-Flow-Elements. For this, flow rates from 30m³/h with WT-High-Flow-Housings with one High-Flow filter element to 350m³/h with WT-High-Flow-Housings with 7 High-Flow filter elements can be achieved.
WTHF150-High-Flow-Housings are made from stainless steel AISI304 or AISI316L and inside and outside mirror-polished. The nominal size of the connections for inlet and outlet ranges according to the amount of installed filter elements from DN80 to DN250. The housing cover of the WTHF150-housings are equipped with swing-bolts and ring-nuts and from size 03WTHF150 on additionally provided with a cover- lift- and swivel-device. All WTHF150-Housings come with two pressure-gauges for inlet and outlet as well as two ball valves for drain and vent.
WTFRP150-High-Flow-Housings made from glass-fiber-reinforced plastic ( FRP ) are available in special for the use with corrosive medias. These also are intended to accept WFHFF- and WFHFC-High-Flow-Elements. WTFRP150-High-Flow-Housings are similar in structure to pressure pipes of reverse-osmosis-elements and can excellently be combined with this.
Material | Housing: Gasket: |
Inlet / outlet | see table (different connections on request) |
Pressure-gauge |
2 x M14x1,5, 0-10bar
|
Vent |
1 x ball valve ½“
|
Drain |
1 x ball valve ½“ (from WTHF150-5 on drain 1“) |
Filter elements | WFHFF or WFHFC |
Internal parts |
Stainless steel AISI304 or AISI316L
|
Pressure |
max. 10 bar
|
Temperature |
max. 95°C
|
Flow rate | The maximum flow rate correlates to the nominal diameter of the housing connection and the characteristic curve of the flow rate of the chosen filter element.
|