WFHFC

High Flow-Pleated Cartridge with Multi-Layer-Structure

WFHFC

WFHFC High-Flow-Pleated cartridges with diameter of 152mm and lengths from 20“ to 60“ are suitable for the very high flow rates. The filter media which is framed in a stable outer cage out of polypropylene is pleated in Multi-Layer-structure and optionally manufactured out of polypropylene or glass fiber. The filter rations from 0.5 μm to 90μm show absolute filter efficiencies. The high filter surface area with depth filter effect creates a lot of space for high dirt hold capacity and long life time.

High-Flow-Pleated Cartridges are available in the two adapter-configurations type P and type M, see picture below. The flow rate of type P is from inside to out-side and of type M from outside to inside. For the installation of the High-Flow-Pleated Cartridges type P and type M special made filter housings are needed.

Technical Data

Filter medium

PP: Polypropylene, GF: Glass fiber

Support/Drainage

PP: Polypropylene
GF: Polyester

Adapter

PP-glass fiber reinforced

Core

Polypropylene

Outer cage

Polypropylene

O-Rings

EPDM, FKM, silicone

Filter ration

0.5 - 90 μm, absolute

Temperature

PP: max. 80°C
GF: max. 120°C

Filter surface area

20“: 2,8 m²
40“: 5,6 m²
60“: 8,4 m²

Differential pressure

max. 3,5 bar to 20°C
max. 1,5 bar to 80°C
Filter exchange recommended at 1,5 bar

Dimensions

Outside diameter 152mm, Lengths 20“ - 60“

Features and Benefits

  • High-Flow-Pleated cartridges 20“ to 60“ long
  • Multi-Layer-Structure out of PP or glass fiber
  • Absolute filter efficiency 0.5μm to 90μm
  • Stable outer cage out of polypropylene
  • High filter surface are with depth filter effect
  • 100% polypropylene, thermically welded
  • High dirt hold capacity, long life time
  • High flow rate, low differential pressure
  • Type P flow direction from inside to outside
  • Type M flow direction from outside to inside

Datasheet

You have a question?